Direct-tensile and flexural strength and toughness of highstrength fiber-reinforced cement composites with different steel fibers
PDF

Keywords

Steel fiber
Fiber reinforced cement composites
Mechanical Strength
Strain-hardening behaviour

How to Cite

Gwon, S., & Shin, M. (2016). Direct-tensile and flexural strength and toughness of highstrength fiber-reinforced cement composites with different steel fibers. Journal of Asian Concrete Federation, 2(1), 67–80. https://doi.org/10.18702/acf.2016.06.2.1.67

Abstract

The main purpose of this study is to investigate effects of the type and volume fraction of steel fibers on the mechanical behaviors of fiber-reinforced cement composites (FRCCs) with high strengths. Various FRCC mix cases were designed and tested in two steps. At the 1st step, two types of steel fibers (straight and hooked) were examined with two different fiber volumes (1.0 and 1.5%). The test variables of the 1st step included the type and volume fraction of steel fibers, and the inclusion of coarse aggregate. At the 2nd
step, ultrahigh strength FRCC mix cases using hooked steel fibers only were tested with two different fiber volumes (1.0 and 1.5%). Various mechanical tests were performed to evaluate the stress-strain behaviors of the FRCCs subjected to uniaxial compression, direct tension, and third-point bending. The test results reveal that the use of hooked steel fibers improved the tensile and flexural capacities of FRCCs more effectively than did the straight steel fibers. Also, the FRCCs generally demonstrated greater direct-tensile and flexural toughness compared with ordinary fiber reinforced concretes (FRCs).

https://doi.org/10.18702/acf.2016.06.2.1.67
PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright (c) 2016 Seongwoo Gwon, Myoungsu Shin

Downloads

Download data is not yet available.